Looking for:
Eset smart security 8 64 bit offline installer free.ESET PROTECT ESSENTIAL On-Prem |
ESET Smart Security (32/64 bit) Offline Installer Free Download.
Antivirus for Windows and macOS devices | ESET.Download ESET Smart Security | ESET
Rules created in this mode can be viewed in the Rule editor, but their priority is lower than the priority of rules created manually or rules created in automatic mode. After selecting Learning mode, the Notify about learning mode expiration in X days option becomes active. After the time period defined in the Notify about learning mode expiration in X days is over, learning mode is disabled again.
The maximum time period is 14 days. After this time period is over, a pop-up window will open in which you can edit the rules and select a different filtering mode. Click Configure rules Here you can select, create, edit or delete rules. Name the rule and select Block from the Action drop-down menu. Open the Target applications tab. Leave the Source applications tab blank to apply your new rule to all applications attempting to perform any of the selected operations in the Operations list on applications in the Over these applications list.
Select Modify state of another application all operations are described in product help, which can be accessed by pressing F1. Add one or several applications you wish to protect.
Select the Notify user check box to display a notification any time that a rule is applied. Click OK to save the new rule. You can choose to Deny or Allow the operation. If you do not choose an action, an action will be selected based on the pre-defined rules. The Allow access to another application dialog window allows you to create a rule based on any new action that HIPS detects and then define the conditions under which to allow or deny that action.
Click Show advanced options to define the exact parameters for your new rule. This means that after creating such a rule, the same operation can trigger another dialog window if the parameters that your previous rule set do not apply to the situation.
After any of these actions, temporary rules will be deleted. Gamer mode can also be used during presentations that cannot be interrupted by antivirus activity. By enabling this feature, all pop-up windows are disabled and the activity of the scheduler will be completely stopped.
System protection still runs in the background but does not demand any user interaction. Enabling Gamer mode is a potential security risk, so the protection status icon in the taskbar will turn orange and display a warning.
You will also see this warning in the main program window where you will see Gamer mode enabled in orange. By selecting Enable Gamer mode when running applications in full screen automatically, Gamer mode will start whenever you initiate a full-screen application and will automatically stop after you exit the application.
This is especially useful for starting Gamer mode immediately after starting a game, opening a full screen application or starting a presentation. You can also select Disable Gamer mode automatically after X minutes to define the amount of time after which Gamer mode will automatically be disabled default value is 1 minute.
This can be problematic if you start a game that connects to the Internet. Normally, you would be asked to confirm such an action if no communication rules or exceptions have been defined , but user interaction is disabled in Gamer mode.
The solution is to define a communication rule for every application that might be in conflict with this behavior or to use a different Filtering mode in the Personal firewall. Keep in mind that if Gamer mode is enabled and you go to a webpage or an application that might be a security risk, it may be blocked but you will not see any explanation or warning because user interaction is disabled. This is accomplished by allowing or denying individual network connections based on specified filtering rules.
It provides protection against attacks from remote computers and enables blocking of some services. This functionality represents a very important element of computer security. Personal firewall configuration can be found in the Setup pane under Network. Here, you can adjust the filtering mode, rules and detailed settings. You can also access more detailed settings of the program. Personal firewall Block all network traffic: disconnect network.
All inbound and outbound communication will be blocked by the Personal firewall. Use this option only if you suspect critical security risks that require the system to be disconnected from the network. Disable filtering: allow all traffic is the opposite of blocking all network traffic. If selected, all Personal firewall filtering options are turned off and all incoming and outgoing connections are permitted. This has the same effect as no firewall being present. While Network traffic filtering is in Blocking mode, clicking Switch to filtering mode will re-enable the firewall.
Automatic filtering mode when Automatic filtering mode is enabled — To change the filtering mode, click Switch to interactive filtering mode. Interactive filtering mode when Interactive filtering mode is enabled — To change the filtering mode, click Switch to automatic filtering mode with user-defined rules. Configure rules and zones Change the protection mode of your computer in the network Any traffic which is considered harmful will be blocked.
View temporary IP address blacklist For more information, click this option and then press F1. Botnet protection — Quickly and accurately spots malware on the system. Advanced Personal firewall setup Filtering modes also influence the level of user interaction required. Filtering can be performed in one of four modes: Automatic mode — The default mode. This mode is suitable for users who prefer easy and convenient use of the firewall with no need to define rules.
However, you can also add custom, user-defined rules. Automatic mode allows all outbound traffic for the given system and blocks all new connections initiated from the network side. Interactive mode — Allows you to build a custom configuration for your Personal firewall. When a communication is detected and no existing rules apply to that communication, a dialog window reporting an unknown connection will be displayed. The dialog window gives the option of allowing or denying the communication, and the decision to allow or deny can be remembered as a new rule for the Personal firewall.
If you choose to create a new rule at this time, all future connections of this type will be allowed or blocked according to the rule. Policy-based mode — Blocks all connections which are not defined by a specific rule that allows them.
This mode allows advanced users to define rules that permit only desired and secure connections. All other unspecified connections will be blocked by the Personal firewall. Learning mode — Automatically creates and saves rules; this mode is suitable for initial configuration of the Personal firewall. Learning mode is not secure, and should only be used until all rules for required communications have been created.
Enable Botnet protection — Selected check box activates this feature in order to protect your computer from this type of attacks. For more information about this type of attack and type of Botnet protection technology, see also topics Botnet and Botnet protection.
This mode is not safe, and is recommended only for initial configuration of the Personal firewall. This section includes the following items: Warning: While in Learning mode, the Personal firewall does not filter communication. All outgoing and incoming communications are allowed. In this mode, your computer is not fully protected by the Personal firewall. Communication type — Select individual principles of rule creation for each type of communication. There exist four types of communication: Inbound traffic from the Trusted zone — An example of an incoming connection within the trusted zone would be a remote computer from within the trusted zone attempting to establish communication with a local application running on your computer.
Outbound traffic to the Trusted zone — A local application attempting to establish a connection to another computer within the local network, or within a network in the trusted zone.
Inbound Internet traffic — A remote computer attempting to communicate with an application running on the computer. Outbound Internet traffic — A local application attempting to establish a connection to another computer. Rule creation policy — This section allows you to define parameters to be added into newly created rules.
Add local port — Includes the local port number of the network communication. For outgoing communications, random numbers are usually generated. For this reason, we recommend enabling this option only for incoming communications. Add application — Includes the name of the local application. This option is suitable for future application-level rules rules which define communication for an entire application.
For example, you can enable communication only for a web browser or email client. Add remote port — Includes the remote port number of the network communication. This option is suitable if you want to define actions for a certain computer or a group of networked computers. Maximum number of different rules for an application — If an application communicates through different ports to various IP addresses, etc. This option allows you to limit the number of rules that can be created for one application.
This option is active when Add remote port is enabled. This option is intended to prevent the user from operating the Personal firewall in Learning mode for an extended period of time. We recommend switching the Personal firewall to Learning mode only for a short time, while the user initiates typical connections. Network communications which are saved during the Learning mode period can be used as the foundation for a permanent set of rules.
When creating or editing a Personal firewall rule, you can assign it to a specific profile or have it apply to every profile. When you select a profile, only the global rules rules with no profile specified and the rules that have been assigned to that profile are applied.
You can create multiple profiles with different rules assigned to easily alter the Personal firewall behavior. Click Profiles Note that in order to Edit or Remove a profile, it must not be selected from the Selected profile drop-down menu. When adding or editing a profile, you can also define the conditions that trigger it.
When creating a profile, you can select events that will trigger the profile. The following options are available: Do not switch automatically — The automatic trigger is turned off the profile must be activated manually. When the automatic profile becomes invalid and no other profile is activated automatically default profile — When the automatic profile becomes invalid ie. Only one profile can use this trigger. If this zone is authenticated — This profile will be triggered when the specified zone is authenticated see section Network authentication.
When the Personal firewall switches to another profile, a notification will appear in the lower right corner by the system clock. Using Personal firewall rules, you can define the action that is taken when different types of network connections are established. Do not display dialog with Trusted zone settings The currently specified zone configuration is automatically used.
The window is divided into two sections. The upper section lists all rules in a shortened view. The lower section displays details about the rule currently selected in the upper section.
The bottom of the window has New, Edit, and Delete Del buttons, which allow you to configure rules. Connections can be divided into incoming and outgoing connections. Incoming connections are initiated by a remote computer attempting to establish a connection with the local system. Outgoing connections work in the opposite way — the local system contacts a remote computer. If a new unknown communication is detected, you must carefully consider whether to allow or deny it.
Unsolicited, unsecured or unknown connections pose a security risk to the system. If such a connection is established, we recommend that you pay particular attention to the remote computer and the application attempting to connect to your computer.
Many infiltrations try to obtain and send private data, or download other malicious applications to host workstations. The Personal firewall allows you to detect and terminate such connections. Description — Description of the application. Name — Name of the application's executable. Select what type of rules will be displayed in the Rules setup section using the Rules to display list: Only user defined rules — Displays only those rules created by the user.
User and predefined rules — Displays all user-defined and default pre-defined rules. All rules including system — All rules are displayed.
By default, rules are added automatically according to user reactions to a new communication. To view more information about an application at the bottom of this window, click the name of the application. You can use the contextual menu to change the display mode. The contextual menu can be also used for adding, editing and deleting rules. For each type direction of communication, you can select the following actions: Allow — To allow communication. Ask — You will be prompted to allow or deny each time communication is established.
Deny — To deny communication. Specific — Cannot be classified with respect to the other actions. For example, if an IP address or port is allowed through the Personal firewall it cannot be classified with certainty, whether incoming or outgoing communications of a related application are allowed. When installing a new application that accesses the network or when modifying an existing connection remote side, port number, etc.
To edit an existing rule, click the Rules tab and then click Edit. Name — Name of rule, check box must be selected to activate the rule. Action — Shows the direction of communication and action. Outgoing connections are allowed Outgoing connections are blocked Incoming connections are allowed Incoming connections are blocked All connections are allowed All connections trigger a dialog window prompting you to select allow or deny All connections are blocked Protocol — Communication protocol.
Address — Address of remote computer. Local port — Port of local computer. Remote port — Port of remote computer. Application — Indicates the application to which the rule applies. Modified — Date of the last modification. Profile — Select the profile from Display rules used in the profile drop-down menu to display the profile's rules filter. New — Click to create a new rule. Edit — Click to edit existing rules. Delete Del — Click to delete existing rules. In this case, the rule cannot fulfill the conditions and the specified action cannot be applied.
If parameters have changed, the given connection may be refused, which can result in problems with operation of the application in question. An example is a change of network address or port number for the remote side. The upper part of the window contains three tabs: General — Specify a rule name, the direction of the connection, the action, the protocol and the profile to which the rule will apply.
Local — Displays information about the local side of the connection, including the number of the local port or port range and the name of the communicating application. Remote — This tab contains information about the remote port port range. It also allows you to define a list of remote IP addresses or zones for a given rule. Protocol represents the transfer protocol used for the rule.
Click Select protocol All rules are enabled For every profile by default. Alternatively, select a custom firewall profile using the Profiles If you click Log, the activity connected with the rule will be recorded in a log. Notify user displays a notification when the rule is applied. At the bottom of all three tabs is a summary of the rule.
When creating a new rule, you have to enter a name for the rule into the Name field. Select the direction to which the rule applies from the Direction drop-down menu. Select the action to be executed when a communication meets the rule from the Action drop-down menu.
A good example of adding a new rule is allowing your Internet browser to access the network. Add the process representing your browser application for Internet Explorer it is iexplore. In the Remote tab, enable port number 80 only if you wish to allow standard Internet browsing activities.
A zone represents a collection of network addresses that create one logical group. Each address in a given group is assigned similar rules defined centrally for the whole group. One example of such a group is the Trusted zone. The Trusted zone represents a group of network addresses which are fully trusted and not blocked by the Personal firewall in any way. These zones can be configured using the Zones tab in the Zone and rule setup window by clicking the Edit button.
The Trusted zone is identified by the local IP address of the network adapter. Mobile computers often enter networks with IP addresses that are similar to the trusted network. To prevent this type of situation, we recommended using zone authentication. Then click Add IPv4 address and select the Subnet option to add a subnet mask that contains the authentication server. Click the Zone authentication tab. Each zone can be set to authenticate to the server. To select a Personal firewall profile to be activated after a successful zone authentication, click Profiles If authentication is unsuccessful, the addresses will not be added to the Trusted zone.
If Switch to profile with the same name automatically a new profile will be created is selected, a new profile will be created after successful authentication. The authentication process is repeated for each network your computer connects to. The server name can be followed by a path specifying the location of the key on the server e. Enter multiple servers, separated by semicolons, to serve as alternate servers if the first one is unavailable. The public key can be a file of one of the following types: PEM encrypted public key.
Encrypted public key Public key certificate. If authentication is successful, a Server authentication successful notification will appear. If authentication is not configured properly, one of the following error messages will appear: Server authentication failed. Maximum time for authentication elapsed. The authentication server is inaccessible.
An error has occurred while communicating with the server. The authentication server is not running. Start the authentication server service see section Zone authentication — Server configuration. The name of the authentication zone does not match the server zone.
The configured zone name does not correspond with the authentication server zone. Review both zones and ensure their names are identical. Server authentication failed. Server address not found in the list of addresses for the given zone. The IP address of the computer running the authentication server is outside the defined IP address range of the current zone configuration. Probably an invalid public key was entered.
Verify that the public key specified corresponds to the private server key. Also verify that the public key file is not corrupted. A zone is authenticated if all selected parameters for the active connection are valid.
To configure the authentication server, enter the authentication zone name, the server listening port default is 80 as well as the location to store the public and private key pair. Next, generate the public and private key that will be used in the authentication process. The private key will remain on the server while the public key needs to be imported on the client side in the Zone authentication section when setting up a zone in the firewall setup. The active firewall mode determines which actions are performed for the new rule.
If Automatic mode or Policy-based mode is activated, the Personal firewall will perform predefined actions with no user interaction. Interactive mode displays an informational window that reports detection of a new network connection, supplemented with detailed information about the connection.
You can opt to allow the connection or refuse block it. If you repeatedly allow the same connection in the dialog window, we recommend that you create a new rule for the connection. To do this, select Remember action create rule and save the action as a new rule for the Personal firewall.
If the firewall recognizes the same connection in the future, it will apply the existing rule without requiring user interaction. Please be careful when creating new rules and only allow connections that you know are secure.
If all connections are allowed, then the Personal firewall fails to accomplish its purpose. These are the important parameters for connections: Remote side — Only allow connections to trusted and known addresses. Local application — It is not advisable to allow connections for unknown applications and processes. Port number — Communication on common ports e. In order to proliferate, computer infiltrations often use the Internet and hidden connections to help them infect remote systems.
If rules are configured correctly, a Personal firewall becomes a useful tool for protection against a variety of malicious code attacks.
The log files can be used to detect errors and reveal intrusions into your system. ESET Personal firewall logs contain the following data: Date and time of event Name of event Source Target network address Network communication protocol Rule applied, or name of worm, if identified Application involved User A thorough analysis of this data can help detect attempts to compromise system security.
Many other factors indicate potential security risks and allow you to minimize their impact: frequent connections from unknown locations, multiple attempts to establish connections, unknown applications communicating or unusual port numbers used.
If your computer is connected to a large network, or to the internet, we recommend that you leave this option enabled. This is the most secure Personal firewall setting and offers a high level of protection.
Personal firewall is inactive — The Personal firewall is integrated in the system and mediates network communication but does not check for threats. If the application protocols are not scanned, protection is carried out at the level of real-time file system protection and on-demand computer scan. Personal firewall is completely disabled — Select this option to completely disengage the Personal firewall. No scanning is performed. This can be useful when testing — if an application is blocked, you can check to see if it is blocked by the firewall.
This is the least secure option; use caution when disabling the firewall completely. Postpone Personal firewall module update until a computer restart — Personal firewall updates will only be downloaded and installed following a computer restart. From here you can access more detailed settings of the program. Internet connectivity is a standard feature for personal computers. Unfortunately, the Internet has become the primary medium for distributing malicious code. For this reason it is essential that you carefully consider your Web access protection settings.
Anti-Phishing protection allows you to block web pages known to distribute phishing content. We strongly recommend that you leave Anti-Phishing enabled.
Antispam protection filters unsolicited email messages. User's Whitelist — Opens a dialog window where you can add, edit or delete email addresses that are considered safe. Email messages received from addresses listed in the Whitelist will not be scanned for spam. User's Blacklist — Opens a dialog window where you can add, edit or delete email addresses that are considered unsafe. Email messages received from addresses listed in the Blacklist will be assessed as spam.
User's Exceptions list — Opens a dialog window where you can add, edit or delete email addresses that may be spoofed and used for sending spam.
Email messages received from addresses listed in the Exception list will always be scanned for spam. By default, the Exception list contains all email addresses from existing email client accounts. When examining incoming messages, the program uses all the advanced scanning methods included in the ThreatSense scanning engine.
This means that detection of malicious programs takes place even before being matched against the virus signature database. ThreatSense engine parameter setup — The advanced virus scanner setup enables you to configure scan targets, detection methods, etc. After an email has been checked, a notification with the scan result can be appended to the message. You can elect to Append tag messages to received and read mail or Append tag messages to sent mail.
Be aware that on rare occasions tag messages may be omitted in problematic HTML messages or forged by some viruses.
The tag messages can be added to received and read email, sent email or both. The available options are: Never — No tag messages will be added at all. To infected email only — Only messages containing malicious software will be marked as checked default. To all scanned email — The program will append messages to all scanned email. This feature allows for simple, subject- based filtering of infected emails if supported by your email program.
It also increases the level of credibility for the recipient and if an infiltration is detected, provides valuable information about the threat level of a given email or sender. Template added to the subject of infected email — Edit this template if you wish to modify the subject prefix format of an infected email. This function will replace the message subject "Hello" with a given prefix value "[virus]" to the following format: "[virus] Hello".
When integration is activated, the ESET Smart Security toolbar is inserted directly into the email client, allowing for more efficient email protection.
For a complete list of supported email clients and their versions, refer to the following ESET Knowledgebase article. Select the check box next to Disable checking upon inbox content change if you are experiencing a system slowdown when working with your email client.
This can occur when retrieving email from the Kerio Outlook Connector Store. Email protection works as a plug-in for these programs. The main advantage of the plug-in is that it is independent of the protocol used. When the email client receives an encrypted message, it is decrypted and sent to the virus scanner.
Email to scan Received email — Toggles checking of received messages. Sent email — Toggles checking of sent messages. Read email — Toggles checking of read messages. Action to be performed on infected email No action — If enabled, the program will identify infected attachments, but will leave emails without taking any action. Delete email — The program will notify the user about infiltration s and delete the message. Move email to the Deleted items folder — Infected emails will be moved automatically to the Deleted items folder.
Move email to folder — Specify the custom folder where you want to move infected emails when detected. Other Repeat scan after update — Toggles rescanning after a virus signature database update. Accept scan results from other modules — If this is selected, the email protection module accepts scan results of other protection modules.
IMAP has some advantages over POP3, for example, multiple clients can simultaneously connect to the same mailbox and maintain message state information such as whether or not the message has been read, replied to or deleted. The protection module providing this control is automatically initiated at system startup and is then active in memory.
IMAP protocol control is performed automatically without the need to reconfigure the email client. By default, all communication on port is scanned, but other communication ports can be added if necessary. Multiple port numbers must be delimited by a comma. Encrypted communication will be not scanned. For the module to work correctly, please make sure it is enabled — POP3 protocol checking is performed automatically without requiring re-configuration of the email client.
This type of communication uses an encrypted channel to transfer information between server and client. Spam represents up to 80 percent of all email communication. Combining several email security principles, the Antispam module provides superior filtering to keep your inbox clean.
One important principle for spam detection is the ability to recognize unsolicited email based on predefined trusted addresses whitelist and spam addresses blacklist. All addresses from your contact list are automatically added to the whitelist, as well as all other addresses you mark as safe. The primary method used to detect spam is the scanning of email message properties. Received messages are scanned for basic Antispam criteria message definitions, statistical heuristics, recognizing algorithms and other unique methods and the resulting index value determines whether a message is spam or not.
Options are as follows: Message processing Add text to email subject — Enables you to add a custom prefix string to the subject line of messages that have been classified as spam. The default is "[SPAM]". Move messages to spam folder — When enabled, spam messages will be moved to the default junk email folder. Use the folder — This option moves spam to a user-defined folder. Mark spam messages as read — Select this to automatically mark spam as read. It will help you to focus your attention on "clean" messages.
Do not write — The Score cell in the Antispam protection log will be empty. Write all messages — All messages will be recorded to the log with a spam score. Start email client antispam protection automatically — When enabled, antispam protection will be activated automatically on system startup. Allow advanced antispam control — Additional antispam databases will be downloaded, increasing antispam capabilities and producing better results.
Known spam addresses can be added to the blacklist and always be classified as spam. Similarly, the same process applies to spam addresses. If an email address is listed on the blacklist, each email message which arrives from that address is classified as spam. Reclassified messages are automatically moved to the SPAM folder, but the sender's email address is not added to the Blacklist. If messages from the Junk E-mail folder are classified as not spam, they are moved to their original folder.
Marking a message as not spam does not automatically add the sender's address to the Whitelist. Unfortunately, it has also become the main medium for transferring malicious code.
We strongly recommend that Web access protection is enabled. Access to known web pages with malicious content is always blocked. You can also define the port numbers used for HTTP communication.
HTTPS communication uses an encrypted channel to transfer information between server and client. Port is set by default. Add, Edit, Remove and Export are used to manage the lists of addresses. Websites in the list of blocked addresses will not be accessible. Websites in the list of excluded addresses are accessed without being scanned for malicious code.
If you select Allow access only to URL addresses in the list of allowed addresses, only addresses present in the list of allowed addresses will be accessible, while all other HTTP addresses will be blocked.
If you add a URL address to the List of addresses excluded from filtering, the address will be excluded from scanning. You can also allow or block certain addresses by adding them to the List of allowed addresses or List of blocked addresses. Click Lists To activate a list, select the List active option. If you want to be notified when entering an address from the current list, select Notify when applying address from the list.
To delete all addresses, select Remove all. The control works automatically, regardless of the Internet browser or email client used. Ports and applications marked as web browsers or email clients — Enables routing of all traffic on the corresponding ports as well as all the communication of the applications marked as browsers and email clients on the internal proxy server. Since WFP technology uses special monitoring techniques, the Web and email clients section is not available.
Because of the enormous amount of malicious code circulating the Internet, safe Internet browsing is a very important aspect of computer protection. Web browser vulnerabilities and fraudulent links help malicious code enter the system unnoticed which is why ESET Smart Security focuses on web browser security. Each application accessing the network can be marked as an Internet browser.
The check box is two-state: Deselected — Communication of applications is filtered only for specified ports. Selected — Communication is always filtered even if a different port is set. We recommend using this option only for applications that do not work properly with their communication being checked.
Running applications and services will be available here automatically. We recommend that you only use this option for addresses that are known to be trustworthy. Remove — Remove selected entries from the list. Internet Protocol version 4 is the older but still the most widely used. Single address — Adds the IP address of an individual computer for which the rule is to be applied for example Address range — Enter the starting and ending address IP address to specify the IP range of several computers for which the rule is to be applied for example Subnet — Subnet a group of computers defined by an IP address and mask.
For example, It is the newest version of the Internet protocol and will replace the older version 4. Single address — Adds the IP address of an individual computer for which the rule is to be applied for example cff:fec9:ca5. You can use various scanning modes for SSL protected communications using trusted certificates, unknown certificates, or certificates that are excluded from SSL-protected communication checking.
Always scan SSL protocol — Select this option to scan all SSL protected communications except communications protected by certificates excluded from checking. If a new communication using an unknown, signed certificate is established, you will not be notified and the communication will automatically be filtered.
When you access a server with an untrusted certificate that is marked as trusted it is added to the trusted certificates list , communication to the server is allowed and the content of the communication channel is filtered. Ask about non-visited sites exclusions can be set — If you enter a new SSL protected site with an unknown certificate , an action selection dialog is displayed.
This mode allows you to create a list of SSL certificates that will be excluded from scanning. Apply created exceptions based on certificates — Activates using exclusions specified in excluded and trusted certificates for scanning SSL communication. This option is available if you select Always scan SSL protocol. Block encrypted communication utilizing the obsolete protocol SSL v2 — Communication using the earlier version of the SSL protocol will automatically be blocked.
Add the root certificate to known browsers should be enabled. Select this option to automatically add the ESET root certificate to the known browsers for example, Opera and Firefox. For browsers using the system certification store, the certificate is added automatically e. Internet Explorer. In some cases, the certificate cannot be verified using the Trusted Root Certification Authorities store e. This means that the certificate is self-signed by someone e.
Most large businesses for example banks use a certificate signed by TRCA. If Ask about certificate validity is selected selected by default , the user will be prompted to select an action to take when encrypted communication is established. An action selection dialog will be displayed where you can decide to mark the certificate as trusted or excluded.
If the certificate is not present in the TRCA list, the window is red. If the certificate is on the TRCA list, the window will be green. You can select Block communication that uses the certificate to always terminate an encrypted connection to the site that uses the unverified certificate.
If the certificate is invalid or corrupt, it means that the certificate expired or was incorrectly self-signed. In this case, we recommend that you block the communication that uses the certificate.
ESET Smart Security will check the content of encrypted communications utilizing certificates in this list. To delete the selected items from the list, click Remove. Click Show or double-click the certificate to display information about the selected certificate.
The content of encrypted communications utilizing the certificates in the list will not be checked for threats. We recommend only excluding web certificates that are guaranteed to be safe and where communication utilizing the certificates does not need to be checked.
To delete selected items from the list, click Remove. The dialog window contains the following information: name of the application that initiated the communication and name of the certificate used. If the certificate is not located in the Trusted Root Certification Authorities store, it is considered to be untrusted. The following actions are available for certificates: Yes — The certificate will be temporarily marked as trusted — the alert window will not be displayed on the next attempt to use the certificate for the duration of the current session.
Yes, always — Marks the certificate as trusted and adds it to the list of trusted certificates — no alert windows will be displayed for trusted certificates. No — Marks the certificate as untrusted for the current session — the alert window will be displayed on the next attempt to use the certificate. Exclude — Adds the certificate to the list of excluded certificates — data transferred over the given encrypted channel will not be checked at all.
Phishing is often used to gain access to sensitive data such as bank account numbers, PIN numbers and more. Read more about this activity in the glossary. ESET Smart Security provides anti- phishing protection, web pages known to distribute this type of content can be blocked. Please see also our Knowledgebase article for an updated and more detailed version of this help page.
Accessing a phishing website When you access a phishing website, you will receive the following dialog in your web browser. By clicking Proceed to the site not recommended , you will be able to access the website without a warning message. To allow a website permanently, you can use the URL address management tool. NOTE: Before submitting a website to ESET, make sure it meets one or more of the following criteria: the website is not detected at all, the website is incorrectly detected as a threat.
In this case, please refer to the Remove phishing site link. Alternatively, you can submit the website by email. Send your email to samples eset. Remember to use a descriptive subject and enclose as much information about the website as possible e. The goal is to prevent children and young adults from accessing pages with inappropriate or harmful content. To activate Parental control for a specific user account, follow the steps below: 1.
There are two methods for activating Parental control: o Click Disabled in the Setup pane from the main program window and change the Parental control state to Enabled. Even though Enabled appears next to Parental control, you must configure Parental control for the desired account by clicking Not defined. In the Account setup window enter an age to determine the level of access and recommended age-appropriate web pages.
Parental control will now be enabled for the specified user account. Click Setup under an account name to customize categories you want to allow or block in the Web page content filtering tab. To allow or block custom web pages that do not match a category, click the Blocked and allowed web pages tab.
If you click Parental control in the Setup pane from the main product window of ESET Smart Security, you will see that the main window is divided into three sections. Parental control After deselecting Enabled on the right, a Temporarily disable protection window will appear. Here you can set the time interval for which protection is disabled. The option then changes to Disabled and all following settings will be hidden. This password can be set in the Access setup section.
If no password is set the following warning will appear under the Parental control option — Password for Advanced setup is required to protect Parental control from modification; Set password The restrictions set in Parental control only affect the standard user accounts. Because an Administrator can override any restriction, they will not have any effect. Note: Parental control requires Application protocol content filtering, HTTP protocol checking and Personal firewall system integration to be enabled in order to function properly.
All of these functionalities are enabled by default. Windows user accounts If you have created a role for an existing account, it will be shown here with the Enabled attribute. Under an active account, click Setup Important: To create a new account for example, for a child , use the following step-by-step instructions for Windows 7 or Windows Vista: 1. Open User Accounts by clicking the Start button located at the bottom left side of your desktop , clicking Control Panel and then clicking User Accounts.
Click Manage another account. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Click Create a new account. Type the name you want to give the user account, click an account type, and then click Create Account. The last section contains two options Set exception for web page If you select the Block check box, the web page will be blocked for this account. If you leave this check box deselected, the web page will be allowed.
Exceptions defined here are superior to the categories defined for the selected account s. For example, if the account has the News category blocked, but you have defined an allowed news webpage as an exception, the account can access the allowed webpage. You can check the changes made here in the Blocked and allowed web pages section.
Show log — This shows a detailed log of the Parental control activity blocked pages, the account the page was blocked for, reason, etc. You can also filter this log based on the criteria you choose by clicking Filter Deselect the check box next to a specific category to block it for the selected account.
Moving the mouse over a category will show you a list of web pages that fall into that category. Here are some examples of categories groups that users might not be familiar with: Miscellaneous — Usually private local IP addresses such as intranet, When you get a or error code, the website will also match this category.
Not resolved — This category includes web pages that are not resolved because of an error when connecting to the Parental control database engine.
Not categorized — Unknown web pages that are not yet in the Parental control database. File sharing — These web pages contain large amounts of data such as photos, videos or e-books. There is a risk that these sites contain potentially offensive material or adult content. To delete an URL address from the list, click the remove button. For example, web page addresses with multiple TLDs must be entered manually examplepage. When you enter a domain to the list, all content located on this domain and all subdomains e.
Note: Blocking or allowing a specific web page can be more accurate than blocking or allowing a whole category of web pages. The Update module ensures that the program is always up to date in two ways, by updating the virus signature database and by updating system components. By clicking Update in the main program window, you can view current update status including the date and time of the last successful update and if an update is needed. The primary window also contains the virus signature database version.
In addition to automatic updates, you can click Update now to trigger an update manually. Updating the virus signature database and updating program components are important parts of maintaining complete protection against malicious code. Please pay attention to their configuration and operation.
If you do not see a recent date, your virus signature database may not be current. Virus signature database version — The virus signature database number, which is also an active link to the ESET website.
Click it to view a list of all signatures added within the given update. Update process After clicking Update now, the download process begins. A download progress bar and remaining time to download will be displayed. To interrupt the update, click Cancel update. If this is not the case, the program is out of date and more vulnerable to infection. Please update the virus signature database as soon as possible. Otherwise, one of the following messages will be displayed: The previous notification is related to the following two Virus signature database update ended with an error messages about unsuccessful updates: 1.
We recommend that you check your authentication data. The Advanced setup window click Setup from the main menu and then click Enter advanced setup Server not found — A possible cause of the error is incorrect Internet connection settings.
We recommend that you check your Internet connectivity by opening any website in your web browser. If the website does not open, it is likely that an Internet connection is not established or there are connectivity problems with your computer. This section specifies update source information, such as the update servers and authentication data for these servers.
In the home version of ESET products you are not able to choose own update server. Update files will automatically be downloaded from the ESET server with the least network traffic. For updates to be downloaded properly, it is essential that all update information is entered correctly.
If you use a firewall, please make sure that the program is allowed to communicate with the Internet HTTP communication is enabled. Your current update profile is displayed in the Selected profile drop-down menu. By default, no verification is required and the Username and Password fields are left empty. Pre-release updates the Pre-release update option are updates that have gone through thorough internal testing and will be available to the general public soon. You can benefit from enabling pre-release updates by having access to the most recent detection methods and fixes.
However, pre-release updates might not be stable enough at all times and SHOULD NOT be used on production servers and workstations where maximum availability and stability is required. It is recommended that basic users leave the Regular update option selected by default. If you experience problems with an update, click Clear to delete temporary update files.
Do not display notification about successful update — Turns off the system tray notification at the bottom right corner of the screen. It is useful to select this option if a full screen application or a game is running. Please note that Gamer mode will disable all notifications. Creating update profiles is especially useful for mobile users who need an alternative profile for Internet connection properties that regularly change. The Selected profile drop-down menu displays the currently selected profile and is set to My profile by default.
To create a new profile, click Profiles When creating a new profile, you can copy settings from an existing one by selecting it from the Copy settings from profile drop-down menu. The program enables you to predefine its behavior when a new program component upgrade is available. Program component updates PCUs include new features or make changes to features from previous versions.
PCUs can be performed automatically without user intervention, or you can choose to be notified each time a PCU is performed. After a program component update is installed, a computer restart may be required.
In the Program component update section, three options are available: Never update program components — Program component updates will not be performed at all. This option is suitable for server installations, since servers can usually be restarted only when they are undergoing maintenance. Always update program components — A program component update will be downloaded and installed automatically.
Please remember that a computer restart may be required. Ask before downloading program components — The default option.
You will be prompted to confirm or refuse program component updates when they become available. After a program component update, it may be necessary to restart your computer to provide full functionality of all modules. The Restart after program component upgrade section allows you to select one of the following options: Never restart computer — You will not be asked to restart, even if it is required.
Alternatively, use License key to activate your product. For more details please refer to this step-by-step guide. Read more. Downloading a desktop app on mobile?
ESET, spol. All information collected through this website is processed for marketing purposes only. I understand I can opt out at any time. Read privacy policy. Your license can also be used to activate our macOS, Android and Linux products. Select the option bellow to start the download and installation process.
Learn more. Get started. Download now. Download for Windows. Download the newest version that can be activated with a purchased license or as a free day trial Download for Windows Downloads Live Installer that will guide you through installation and activation. Configure download. Filename: File size: Version:. Download Options Back to simple download.
Comments
Post a Comment